Carbonit WFP-Spezial 20µm, 10 inch for Carbonit Quadro 60
Carbonit WFP-Spezial 20µm, 10 inch for Carbonit Quadro 60
Delivery: 5 days within Europe
Carbonit WFP-Spezial 20µm
for water filtration already at the house entrance (house connection).
For Carbonit QUADRO 60 units in WFP design.
Activated carbon block filter (sintered) with dimensions designed for QUADRA systems.
Activated carbon block filter designed for chemical-physical removal of substances,
as well as simple mechanical particle retention of undesirable substances in drinking water.
This filter does not aim to provide a bacteriological barrier through the finest filter pores.
Primarily, the filtering of large quantities of water in a short time is intended and aimed for.
Dimension:
length 10 inches
Perfomance:
Filter change after 6 months (according to DIN 1988) or after the consumption of 30000 liters of filter water.
However, an earlier change may be necessary if the water flow is noticeably reduced.
An early change is not a defect of the filter used, but an indication of an increased occurrence of fine particles in the unfiltered water,
which then block the filter faster.
Filter fineness:
20µm (WFP special)
Flow rate in L/min: WFP Protect (20 µm): 40 l
(optional WFP Protect L (20µm): 80 l - please ask specifically if required)
The following filter ratings are also available on request
0.45µm (WFP Premium…)
5µm (WFP Protect…)
10µm (WFP Select)
or corresponding L variants (L = long)
available
Use only with cold water, protect against frost
when changing the filter:
always replace all four filter cartridges (of the same fineness).
Usable filter systems:
CARBONIT® Monoblock WFP filter cartridges are suitable for the QUADRO 60 filter system
(for QUADRO 120 please ask WFP... L )
Item ID | 70030203 |
Condition | New & with original packaging |
Variation ID | WFP-Spezial-10Zoll |
Manufacturer | Carbonit |
Manufacturing country | Germany |
Content | 1 piece |
Weight | 0 g |
Net weight | 0 g |
Dimensions | 0×0×0 mm |
Item list