Quick Change Direct Flow Reverse Osmosis 600 GPD-ULP

Here's the new 600 GPD Direct Flow system with Quick Change filters. With systems using conventional housings, the housings must be disinfected internally every time the filter is changed. There's also always the risk of germs entering the system during filter changes. This isn't a problem with this system. The filters are integrated into the housing and are replaced as a complete unit. You don't need any tools like housing wrenches, and you don't even have to turn off the water, because the filter head closes automatically during the filter change. Simply unscrew the cartridge clockwise, insert the new cartridge, and the filter change is complete. It's never been easier. This innovative system also doesn't require a tank. The water is purified in five stages directly at the point of use. This eliminates the risk of bacterial contamination in a tank. The system is equipped with an electric booster pump and an automatic membrane flushing system.

Stage 1 5µ Sediment Quick Change self-closing
Stage 2 CTO activated carbon quick change self-closing
3-stage 1µ Sediment Quick Change self-closing
4-stage QC-3213-600 membrane
5-stage T33 GAC filter

Optional germ barrier possible

Technical data

Dimensions of the system: 40 x 22 x 47 (L x W x H / dimensions in cm)
Capacity: up to 2,200 liters of pure water at a permeate/wastewater ratio of approximately 1:2
Brushless pump, max. 6 hours runtime
two solenoid valves
manometer
Pre-filter housing Quick Change, self-closing during filter change
Power connection required
Filter change according to DIN 1988: 6 months
Membrane replacement: approximately every 2-3 years

Wall/stand bracket, white lacquered, new reinforced version
Erp 2 power supply consumption: max. 0.5 watts in standby mode
Automatic flushing valve combined with a 1800 ml flow restrictor. Flushes automatically for 18 seconds at the start.
A solenoid valve on the water inlet side and one on the wastewater side. Prevents the backflow of wastewater into the system (germ protection).
Reinforced 3013 membrane housing with rotating brackets

Scope of delivery:
600 GPD 5-stage reverse osmosis system with brushless booster pump
Faucet adapter for 3/8 + 3/4 inch
Hoses and wrenches, as well as German instructions

*The performance and quality of the purified water produced by the JG 600 GPD-ULP Professional depends on the characteristics of the tap water, such as temperature, conductivity, hardness, and pH value. With average tap water of approximately 250 ppm, purified water with a conductivity of approximately 5–25 ppm is possible.

Link to replacement filter set

Manufacturer and EU representative

Jörg Gottwald | JG
At Erdbeerbrink 7
31718 Pollhagen
Telephone: + 49 (0)5721 / 996245
Fax: +49 (0)5721 / 996244
Email: info[at]der-wasseraufbereiter[dot]de