PI-Power-Compact 300 UV-Plus Directflow reverse osmosis, UV-LED, glyphosate filter set

PI®-Power-Compact 300 UV-Plus, direct-flow osmosis system, max. 2.0 liters/minute
with integrated glyphosate filter set, with integrated UV LED lighting system

Our prices are the cheapest; if you see a cheaper price elsewhere, we will beat it by 10 EUR.

Unique direct-flow reverse osmosis system without a storage tank. For fast and convenient filtration of drinking water. Includes a PI® Cell Vitalizer for mineralizing and energizing the filtered water. Made in the European Union.

• Living water of the quality of the best spring waters
• Highest rejection rates of ingredients (97.5% - 99%)
• Very fast filtration of water directly from the cold water supply.
• Low wastewater rate of 0.45 liters of wastewater per liter of tap water
• Prevention of bacterial growth by eliminating the need for a water tank (standing water)
• Continuous membrane flushing and water-cooled pump (no thermal problems)
• Space-saving and compact design with control indicators for safe operation
• Low maintenance and follow-up costs thanks to a durable membrane.
• Free 3-liter sample of PI® water available to order from us

The PI®-POWER Compact Plus version is particularly well suited for the following applications:

• Large households
• Restaurants
• Large medical practices and small clinics

Follow-up costs (as of 2017):

• Pre-filter set: Replace every 6 months (38.40 euros)
• Membrane set: Replace every 2 years (184.00 euros)
• PI®-Cell Vitalizer: Replace every 6-10 years (816.00 Euro)
• Glyphosate replacement filter: Change every 6 months (119.00 euros)

Scope of delivery: The reverse osmosis system is delivered fully assembled and ready for connection. It consists of the under-sink unit, which filters the water, and the PI® Cell Vitalizer, which mineralizes and energizes the filtered water. The following components are included in the scope of delivery:

• PI®-Power-Compact 300 Plus
• PI®-Cell-Vitalizer SPECIAL
• UV LED lamp, used immediately before the vitalizer/after the membranes (illustration)
• The glyphosate combination set, consisting of two housings including Antiglyphosate® filters.
  Prepared for easy installation. The set simply needs to be connected.
  Filters are already built into the housings.
  The dual filters must always be connected in series AFTER the reverse osmosis system (see also diagram).
• Dispensing tap (3-way tap available on request for an additional charge)
• T-piece with manometer and pressure reducer (for connection to the angle valve)
• Water stop for leakage monitoring
• Connection kit with small parts

Free drinking sample: A free drinking sample of the water can be ordered from us.

Materials used: All materials used are high-quality and free of harmful substances. The housing of the unit and the vitalizer is made of stainless steel. All plastic parts used are guaranteed free of phthalates (plasticizers), bisphenol A (hormones), acetaldehyde, and antimony.

Conditions for the incoming water (before reverse osmosis)
1. The incoming water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be above 1.7 bar.
4. The raw water TDS content (total dissolved solids) must be below 600 ppm (1200 µS) (if values ​​are above this, please send a water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values ​​above 25° dH, please send a water analysis and request special information on pre-softening).

Technical data for the reverse osmosis system:

• Operating voltage: 220-240V AC
• Output: 3.4 to 3.8 liters/minute
• Incoming water: Temperature 4-40°C, water pressure min. 1.7 bar
• Ultrapure water: 55% ultrapure water corresponds to 1.8 to 2.0 liters/minute
• Wastewater: 45% wastewater corresponds to 1.6 to 1.8 liters/minute
• Osmosis membrane: 2 pieces 150 GPD reverse osmosis membrane
• Pre-filters: 1 sediment filter, 1 activated carbon filter
• Dimensions (H/W/D): Installation upright 430x110x410mm, Installation horizontal 110x430x410mm
• Housing: Stainless steel

Technical specifications PI®-Cell-Vitalizer:

• Flow rate: 2.0 liters/minute
• Water pressure: 0.5 to 6 bar
• Housing: Stainless steel
• Base unit: Duracon
• Cartridge: Polypropylene
• Weight: 2.9 kg
• Dimensions: Diameter 130mm, Height 370mm

IMPORTANT INFORMATION

Inspection of goods : Please inspect your system, replacement filters, or spare parts immediately upon receipt for any transport damage. Remove the cover of your system to inspect the internal components.

Commissioning : The system must be connected and put into operation within a maximum of 7 days to prevent potential bacterial contamination. When installing the system, please strictly adhere to the flushing times specified in the installation instructions (reverse osmosis 20 min., entire system including PI-Cell Vitalizer an additional 20 min.) . The pre-filters can be stored in their original packaging for up to 3 years.

Installation: You can view the installation process step by step at the following link.

https://pi-power-compact.com/de/installation

Warranty : You receive a 2-year warranty on your PI-Power Compact model. Please retain the original packaging and instruction manual! If lost, the special packaging can be reordered for a fee.