PI-Power-Compact 300 Plus direct flow osmosis system max. 2.0 liters/minute
Wonderful, soothing, soft water - like from a cool, pure spring.
PI®-Power-Compact 300 Plus direct flow osmosis system max. 1.8 liters/minute
Cheapest with us, if you see a cheaper price elsewhere, we will beat it by 10 EUR.
Unique direct-flow reverse osmosis system without a storage tank. For quick and convenient filtering of drinking water. Includes PI® Cell Vitalizer for mineralizing and energizing the filtered water. Manufactured in the European Union.
- Living water in the quality of the best spring waters
- Highest ingredient rejection rates (97.5% - 99%)
- Very fast filtering of water directly from the cold water pipe
- Low wastewater rate of 0.45 liters of wastewater per liter of tap water
- Avoidance of germs by omitting a water tank (standing water)
- Continuous membrane flushing and water-cooled pump (no thermal problems)
- Space-saving and compact design with control indicators for safe operation
- Low maintenance and follow-up costs thanks to durable membrane
- Drinking sample 3 liters of PI® water can be ordered free of charge from us
The PI®-POWER Compact SPECIAL version is particularly suitable for the following applications:
- Large households
- Restaurants
- Large medical practices and small clinics
Follow-up costs (as of 2020):
- Pre-filter set: Change every 6 months (29.99 euros)
- Membrane set: Change every 2 years (179.00 euros)
- PI®-Cell Vitalizer: Change every 6-10 years (799.00 euros)
Scope of delivery: The reverse osmosis system is delivered completely ready for connection. It consists of the under-sink system, which filters the water, and the PI® Cell Vitalizer, which mineralizes and energizes the filtered water. The scope of delivery includes the following components:
- PI®-Power-Compact Plus 300
- PI® Cell Vitalizer SPECIAL
- Faucet (3-way faucet available on request for an additional charge)
- T-piece with pressure gauge and pressure reducer (for connection to the angle valve)
- Water stop for leak monitoring
- Connection set with small parts
Free sample: You can order a free sample of the water from us.
Materials used: All materials used are high-quality and free from harmful substances. The housing of the system and the Vitalizer is made of stainless steel. All plastic parts used are guaranteed free of so-called plasticizers (phthalates), bisphenol A (hormones), acetaldehyde, and antimony.
Conditions for the inlet water (before reverse osmosis)
1. The incoming water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be above 1.7 bar.
4. The raw water TDS (total dissolved solids) content must be below 600 ppm (1200 µS) (for values above this, please send water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values above 25° dH, please send a water analysis and request special information on pre-softening)
Technical data:
Case: stainless steel
Stand part: Duracon
Cartridge housing: polypropylene
Materials in the PI -cell vitalizer cartridge:
BCS PI Ceramics Type SS-16 Coral Sand
IMS -PI -ceramics made of organic calcium
YMS-PI ceramics (Yamato Mineral Stone)
BCS PI ceramics type SS-6
BCS PI zeolites
Mass:
Installation standing:
| Height: | 43 cm |
| Width: | 11 cm |
| Depth: | 41 cm |
Installation horizontally:
| Height: | 11 cm |
| Width: | 42 cm |
| Depth: | 41 cm |
Processing technology:
| Pre-filtering: | 2 pre-filters (sediment + carbon) |
| Fine filtering: | 2/150 gpd |
| Membrane production capacity: | 3.3 – 3.6 l/min |
| Yield*: | 55% pure water (1.5 – 1.8 L/min) |
| 45% wastewater (1.25 – 1.45 L/min) |
*The stated yield is only possible under optimal conditions at a water temperature of approximately 25°C. Under unfavorable conditions (lower water temperature, high lime content, etc.), the yield can be as low as 1:2. 1 liter of permeate (pure water) to 2 liters of concentrate (wastewater). The amount of wastewater generated by flushing the membrane was not taken into account in the yield figures.
-
Conditions for the inlet water (before reverse osmosis)
1. The incoming water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be above 1.7 bar.
4. The raw water TDS (total dissolved solids) content must be below 600 ppm (1200 µS) (for values above this, please send water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values above 25° dH, please send a water analysis and request special information on pre-softening)
Specifications
Our tap water today is far removed from its natural state. Life-sustaining metabolic processes are not optimally supported. Living cells in all organisms simply need "good" water.
- can detoxify and purify
- can regenerate
- can strengthen the immune system
- can promote healthy growth
- can increase vitality
| PI®-POWER-COMPACT |
| "The cell is immortal. Only the fluid in which the cell swims is subject to degenerative processes." Dr. A. Carrel, Nobel Prize in Medicine |
European Patent: 0 541 796 B1
International patent: PCT / JP 90 / 00651
International approval:
WO 91 / 17957 28.11.91 G.91 / 27
Index C15: C 01 G 49 / 00
Trademark: No. 39906218.1 Designation: PI, ∏ protected by trademark law:
399 06 220.3, 399 06 217.3
End of the manufacturer's statement
For legal reasons, no statements of our own regarding water revitalization or water vitalization are made here. Interested customers should form an opinion on this scientifically controversial topic before purchasing.
Book recommendations
Eckhard Weber, Vitalizing Water: Activating, Energizing, and Reviving Drinking Water (ISBN-10: 3778791680) or Ulrich Holst, The Secrets of Water Revitalization (ISBN-10: 3928554522)
WEEE Reg. No. DE 59051762
