Disinfection reverse osmosis - Knickn'clean-Aqua

Treatment of filter systems

Knickn'clean-Aqua consists of a plastic bag (suitable for drinking water) containing two liquids in separate compartments. Knickn'clean-Aqua is activated by squeezing the inner, smaller bag (swiping it upwards toward the flap).

Instructions for use

1. Remove the activated carbon filter and "bridge" it so that the

Water flow is guaranteed all the way to the tap of the osmosis system.

It is important that there is no activated carbon left in the entire system.

2. Activate the bag by "rolling" it upwards until the two liquids

Then let the bag sit for about 30 to 45 minutes so that the two

Components can react with each other.

3. Cut open the bag and pour the liquid into the first pre-filter.

4. Run a little water every 1-2 hours to allow the active ingredient from the pre-filter to penetrate the entire system. Repeat this process 6-8 times, then reinstall the activated carbon filter.

5. Drain the tank through the faucet. After that, the water is safe to drink again according to German drinking water regulations.

Safety instructions

Use biocidal products carefully. Always read the label and product information before use. Keep out of reach of children. Do not puncture. Do not drink. If externally damaged, rinse with water and dispose of. The product may be marketed without authorization under the transitional provisions of the Biocidal Products Regulation (N-107521). After activation, a chlorine dioxide solution (50 ml) is produced with a concentration of <0.3 g/l.

Ingredients information

25ml sodium chlorite: < 2.5% (25g/l)

25ml hydrochloric acid: < 2.5% (25g/l)

Product is patent protected.