PI®-Power-Compact 450 direct flow osmosis system max. 2.5 liters/minute

PI®-Power-Compact 450 Direct-Flow Reverse Osmosis System max. 2.5 liters/minute

Our prices are the lowest; if you find a cheaper price elsewhere, we will undercut it by 10 EUR. The crossed-out price refers to the manufacturer's RRP.

Unique direct-flow reverse osmosis system without a storage tank. For fast and convenient drinking water filtration. Additionally includes a PI®-Cell-Vitalizer for mineralization and energization of the filtered water. Made in the European Union.

 

• Living water with the quality of the best spring waters
• Highest rejection rates for substances (97.5% - 99%)
• Very fast water filtration directly from the cold water line
• Low wastewater rate of 0.45 liters of wastewater per liter of tap water
• Prevention of bacterial growth by avoiding a water tank (stagnant water)
• Continuous membrane flushing and water-cooled pump (no thermal issues)
• Space-saving and compact design with control indicators for safe operation
• Low maintenance and follow-up costs thanks to a long-lasting membrane
• Free 3-liter PI®-water sample can be ordered from us

 

The PI®-POWER Compact 450 Plus version is particularly suitable for the following applications:

• Large households
• Catering businesses
• Large medical practices and small clinics

 

Follow-up costs (as of 2/2017):

• Pre-filter set: Change every 6 months (38 Euro)
• Membrane set: Change every 2 years (349.50 Euro)
• PI®-Cell Vitalizer: Change every 6-10 years (880.00 Euro)

 

Scope of delivery: The reverse osmosis system is supplied completely ready for connection. It consists of the under-sink unit that filters the water and the PI®-Cell-Vitalizer, which mineralizes and energizes the filtered water. The delivery includes the following components in detail:

• PI®-Power-Compact 450 Plus
• PI®-Cell-Vitalizer SPECIAL
• Water faucet (3-way faucet available upon request for an extra charge)
• T-piece with pressure gauge and pressure reducer (for connection to the angle valve)
• Water stop for leak detection
• Connection set with small parts

 

Free water sample: A sample of the water can be ordered from us free of charge.

 

Materials used: All materials used are high-quality and free of harmful substances. The housing of the unit and the vitalizer is made of stainless steel. All plastic parts used are guaranteed to be free of so-called plasticizers (phthalates), bisphenol A (hormones), as well as acetaldehyde and antimony.

Requirements for input water (before reverse osmosis)
1. The input water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be above 1.7 bar.
4. The raw water TDS content (sum of all dissolved substances) must be below 600 ppm (1200 µS) (for values above this, please send a water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values above 25° dH, please send a water analysis and request special information on pre-softening)

 

Technical data for reverse osmosis system:

• Operating voltage: 220-240V AC
• Performance: 4 to 4.6 liters/minute
• Input water: Temperature 4-40°C, water pressure min. 1.7 bar
• Pure water: 55% pure water corresponds to 2.2 to 2.5 liters/minute
• Wastewater: 45% wastewater corresponds to 1.8 to 2.1 liters/minute
• Osmosis membrane: 3 x 150 GPD reverse osmosis membrane
• Pre-filter: 1 x sediment-activated carbon filter (combi-filter)
• Dimensions of housing (H/W/D): Upright installation 450x110x450mm, horizontal installation 110x450x450mm
• Dimensions of Vitalizer: (Diameter 130mm, height 370mm)
• Housing: Stainless steel
• Stand part: Duracon
• Cartridge: Polypropylene
• Weight: 2.9 kg

 

Technical data for PI®-Cell-Vitalizer:

• Flow rate: 2.0 liters/minute
• Water pressure: 0.5 to 6 bar
• Housing: Stainless steel
• Stand part: Duracon
• Cartridge: Polypropylene
• Weight: 2.9 kg
• Dimensions: Diameter 130mm, height 370mm

 

IMPORTANT INFORMATION

 

Checking the goods: Please check your system, replacement filters, or spare parts immediately upon receipt for transport damage. For this purpose, also remove the cover of your system to check the interior.

 

 

Commissioning: The system must be connected and put into operation within a maximum of 7 days to avoid possible bacterial contamination. When installing the system, please strictly observe the flushing times listed in the installation manual (reverse osmosis 20 min., entire system including PI-Cell Vitalizer an additional 20 min.). The pre-filters can be stored in their original packaging for up to 3 years.

 

 

Installation: You can view the step-by-step installation via the following link.

https://pi-power-compact.com/de/installation

 

Warranty: You receive a 2-year warranty on your PI-Power Compact model. Please keep the original packaging and instruction manual for this purpose! If lost, the special packaging can be reordered at a cost.