New: 800 GPD Direct Flow Reverse Osmosis System Water Point (3213-800)
800 GPD Direct Flow Reverse Osmosis System (brushless pump)
Simply an awesome facility!
Clear, pure water right in your kitchen.
What are the biggest advantages of this system? Here they are:
5-stage reverse osmosis system with booster pump and power supply suitable for continuous operation of up to 6 hours at a time.
The 800 GPD system produces up to 2300 liters of pure water per day with a pure water /
Wastewater ratio of up to 1:1.5 to 1:2 at approximately 20°C. This corresponds to approximately 2–2.3 liters per minute.
This innovative system works without a tank. The water is purified in four stages at the moment of use.
The risk of contamination in the tank is thus eliminated.
This new system uses only high-quality quick fittings (no Jaco fittings), as well as special pre-filter housings with double sealing rings that are easy to close manually.
The system can optionally be equipped with a safe faucet with a ceramic valve.
Five filter stages for clean, pure water
1st stage: coarse filter/sediment filter,
Filter fineness 5 microns (for removing coarse particles such as sand, rust, chlorine and limescale particles)
2nd stage: Activated carbon granules: removes chlorine and organic contaminants
3rd stage: Fine filter/sediment filter 1 micron: removes particularly fine particles
4th stage: Membrane 800GPD, 0.0001µm: removes all pollutants and flavors
5th stage: Activated carbon coconut
Please note that vibrations during transport may cause screw connections to loosen and leak. In this case, tighten the connections until the leak is eliminated.
Scope of delivery:
• Reverse osmosis system 800 GPD
• 3 pre-filters
• 1 high-quality membrane 800GPD
• Active carbon filter
• Integrated booster pump (brushless) for optimal performance
• 1 transformer Erp 2 max. 0.5 watts
• Filter wrench and membrane wrench
• Hose lines in 3/8" and 1/4" size
• Complete connection and assembly set for 3/8 inch angle valve
• Detailed installation instructions in German
*The performance and quality of the pure water of the 800 GPD depends on the water quality of the tap water,
Such as temperature, conductivity, hardness, and pH value. With an average tap water concentration of approximately 250 ppm, pure water with a conductivity of approximately 5-25 ppm is possible. Maximum continuous operation time is 6 hours.
