Merlin PRF Direct Flow Reverse Osmosis from General Electric

Merlin Direct Flow Reverse Osmosis from General Electric

The innovation for 30 years of reverse osmosis technology:

The new MERLIN RO system delivers approximately 1.5 liters of filtered water per minute (approx. 2000 liters/day) with the usual high retention rate, even without a water tank and with an optimized ratio of only 2:1!

Reverse osmosis system for filtered drinking water, without an extra water tank.
The Merlin reverse osmosis system produces filtered drinking water of the highest purity from tap water at a very high flow rate (approx. 1.5 l/min). It is ideal for preparing baby food, even in cases of poor raw water quality (e.g., well water or high levels of nitrate, copper, or lead).
The device does not require a water tank! The water flow is provided via an included extra-small tap (TouchFlow), which can be installed on the sink or similar (Ø 11.5 or 12 mm).

Technical data:
Pre-filter:
AK combi filter for pre-separation of coarse particles, change interval: approximately every 6 months
Main filter:
2x wound TFC membrane "Merlin." Replacement interval: every 3-5 years
Post-filter:
Inline activated carbon filter. Change interval: approximately every 6 months

Perfomance:
Approx. 3500 l per day at 4 bar and 10°C (±15%) or an average of 1.5 l/min, operating range 3-7 bar, ratio of concentrate (wastewater) to permeate (pure water) 2:1 to 3:1 (depending on line pressure)
Dimensions: Filter unit: (HxWxD) 43.3 x 51.7 x 24.6 cm
The system is very space-saving, as it does not require a tank, and can be installed upright or lying down under the sink, but also in the basement with a supply line to the sink.

Attention! The adapter for the water connection is not included and must be ordered separately. Sizes: 1/2" female thread x 1/2" hose, 3/8" female thread x 1/2" hose, and 3/4" female thread x 1/2" hose

But can be ordered by email.

Replacement filter set for this system click here