PI-Power-Compact 300 UV-Plus Directflow reverse osmosis +UV-LED

PI®-Power-Compact 300 UV Plus, direct-flow osmosis system, max. 2.0 liters/minute
with integrated UV LED lighting system

Our prices are the cheapest; if you see a cheaper price elsewhere, we will beat it by 10 EUR.

Unique direct-flow reverse osmosis system without a storage tank. For fast and convenient filtration of drinking water. Includes a PI® Cell Vitalizer for mineralizing and energizing the filtered water. Made in the European Union.

• Living water of the quality of the best spring waters
• Highest rejection rates of ingredients (97.5% - 99%)
• Very fast filtration of water directly from the cold water supply.
• Low wastewater rate of 0.45 liters of wastewater per liter of tap water
• Prevention of bacterial growth by eliminating the need for a water tank (standing water)
• Continuous membrane flushing and water-cooled pump (no thermal problems)
• Space-saving and compact design with control indicators for safe operation
• Low maintenance and follow-up costs thanks to a durable membrane.
• Free 3-liter sample of PI® water available to order from us

The PI®-POWER Compact Plus version is particularly well suited for the following applications:

• Large households
• Restaurants
• Large medical practices and small clinics

Follow-up costs (as of 2017):

• Pre-filter set: Replace every 6 months (38.40 euros)
• Membrane set: Replace every 2 years (184.00 euros)
• PI®-Cell Vitalizer: Replace every 6-10 years (816.00 Euro)

Scope of delivery: The reverse osmosis system is delivered fully assembled and ready for connection. It consists of the under-sink unit, which filters the water, and the PI® Cell Vitalizer, which mineralizes and energizes the filtered water. The following components are included in the scope of delivery:

• PI®-Power-Compact 300 Plus
• PI®-Cell-Vitalizer SPECIAL
• UV LED lamp, used immediately before the vitalizer/after the membranes (illustration)
• Dispensing tap (3-way tap available on request for an additional charge)
• T-piece with manometer and pressure reducer (for connection to the angle valve)
• Water stop for leakage monitoring
• Connection kit with small parts

Free drinking sample: A free drinking sample of the water can be ordered from us.

Materials used: All materials used are high-quality and free of harmful substances. The housing of the unit and the vitalizer is made of stainless steel. All plastic parts used are guaranteed free of phthalates (plasticizers), bisphenol A (hormones), acetaldehyde, and antimony.

Conditions for the incoming water (before reverse osmosis)
1. The incoming water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be above 1.7 bar.
4. The raw water TDS content (total dissolved solids) must be below 600 ppm (1200 µS) (if values ​​are above this, please send a water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values ​​above 25° dH, please send a water analysis and request special information on pre-softening).

Technical data for the reverse osmosis system:

• Operating voltage: 220-240V AC
• Output: 3.4 to 3.8 liters/minute
• Incoming water: Temperature 4-40°C, water pressure min. 1.7 bar
• Ultrapure water: 55% ultrapure water corresponds to 1.8 to 2.0 liters/minute
• Wastewater: 45% wastewater corresponds to 1.6 to 1.8 liters/minute
• Osmosis membrane: 2 pieces 150 GPD reverse osmosis membrane
• Pre-filters: 1 sediment filter, 1 activated carbon filter
• Dimensions (H/W/D): Installation upright 430x110x410mm, Installation horizontal 110x430x410mm
• Housing: Stainless steel

Technical specifications PI®-Cell-Vitalizer:

• Flow rate: 2.0 liters/minute
• Water pressure: 0.5 to 6 bar
• Housing: Stainless steel
• Base unit: Duracon
• Cartridge: Polypropylene
• Weight: 2.9 kg
• Dimensions: Diameter 130mm, Height 370mm

IMPORTANT INFORMATION

Inspection of goods : Please inspect your system, replacement filters, or spare parts immediately upon receipt for any transport damage. Remove the cover of your system to inspect the internal components.

Commissioning : The system must be connected and put into operation within a maximum of 7 days to prevent potential bacterial contamination. When installing the system, please strictly adhere to the flushing times specified in the installation instructions (reverse osmosis 20 min., entire system including PI-Cell Vitalizer an additional 20 min.) . The pre-filters can be stored in their original packaging for up to 3 years.

Installation: You can view the installation process step by step at the following link.

https://pi-power-compact.com/de/installation

Warranty : You receive a 2-year warranty on your PI-Power Compact model. Please retain the original packaging and instruction manual! If lost, the special packaging can be reordered for a fee.