PI-Power-Compact 300 UV-Plus Directflow reverse osmosis +UV-LED

PI®-Power-Compact 300 UV Plus, Direct-Flow Osmosis System, max. 2.0 liters/minute
with integrated UV-LED lighting unit

Lowest price guaranteed: if you see a cheaper price elsewhere, we will beat it by 10 EUR. Struck-through price refers to the manufacturer's RRP.

Unique Direct-Flow osmosis system without a storage tank. For fast and convenient drinking water filtration. Additionally includes a PI®-Cell-Vitalizer for the mineralization and energization of the filtered water. Manufactured in the European Union.

 

• Living water with the quality of the best spring waters
• Highest rejection rates for impurities (97.5% - 99%)
• Very fast water filtration directly from the cold water pipe
• Low wastewater rate of 0.45 liters of wastewater per liter of tap water
• Prevention of bacterial contamination by avoiding a water tank (standing water)
• Continuous membrane flushing and water-cooled pump (no thermal issues)
• Space-saving and compact design with control indicators for safe operation
• Low maintenance and follow-up costs thanks to long-lasting membranes
• Free 3-liter trial sample of PI®-water available to order from us

 

The PI®-POWER Compact Plus model is particularly suitable for the following applications:

• Large households
• Catering businesses
• Large medical practices and small clinics

 

Follow-up costs (as of 2017):

• Pre-filter set: Change every 6 months (38.40 Euro)
• Membrane set: Change every 2 years (184.00 Euro)
• PI®-Cell Vitalizer: Change every 6-10 years (816.00 Euro)

 

Scope of delivery: The osmosis system is supplied completely ready for connection. It consists of the under-sink unit, which filters the water, and the PI®-Cell-Vitalizer, which mineralizes and energizes the filtered water. The delivery specifically includes the following components:

• PI®-Power-Compact 300 Plus
• PI®-Cell-Vitalizer SPECIAL
• UV-LED lamp, immediate use before the vitalizer/after the membranes (see image)
• Dispensing tap (3-way tap available upon request for an extra charge)
• T-piece with pressure gauge and pressure reducer (for connection to the angle valve)
• Water stop for leak monitoring
• Connection set with small parts

 

Free trial sample: A trial sample of the water can be ordered from us free of charge.

Materials used: All materials used are high-quality and free from harmful substances. The housing of the system and the vitalizer are made of stainless steel. All plastic parts used are guaranteed to be free of so-called plasticizers (phthalates), Bisphenol A (hormones), as well as acetaldehyde and antimony.

Requirements for the input water (before reverse osmosis)
1. The input water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be over 1.7 bar.
4. The raw water TDS content (sum of all dissolved solids) must be below 600 ppm (1200 µS) (for values above this, please send a water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values above 25° dH, please send a water analysis and request special information on pre-softening)

 

Technical data osmosis system:

• Operating voltage: 220-240V AC
• Capacity: 3.4 to 3.8 liters/minute
• Input water: Temperature 4-40°C, water pressure min. 1.7 bar
• Pure water: 55% pure water corresponds to 1.8 to 2.0 liters/minute
• Wastewater: 45% wastewater corresponds to 1.6 to 1.8 liters/minute
• Osmosis membrane: 2 pieces 150 GPD reverse osmosis membrane
• Pre-filter: 1 piece sediment filter, 1 piece activated carbon filter
• Dimensions (H/W/D): Vertical installation 430x110x410mm, horizontal installation 110x430x410mm
• Housing: Stainless steel

 

Technical data PI®-Cell-Vitalizer:

• Flow rate: 2.0 liters/minute
• Water pressure: 0.5 to 6 bar
• Housing: Stainless steel
• Component: Duracon
• Cartridge: Polypropylene
• Weight: 2.9kg
• Dimensions: Diameter 130mm, height 370mm

 

IMPORTANT INFORMATION

 

Checking the goods: Please check your system, replacement filters, or spare parts for transport damage immediately upon receipt. To do this, also remove the cover of your system to check the interior.

 

 

Commissioning: The system must be connected and put into operation within a maximum of 7 days to avoid potential bacterial contamination. When installing the system, it is essential to follow the flushing times listed in the installation manual (reverse osmosis 20 min., entire system incl. PI-Cell Vitalizer for another 20 min.). The pre-filters can be stored in their original packaging for up to 3 years.

 

 

Installation: You can view the installation in individual steps via the following link.

https://pi-power-compact.com/de/installation

 

Warranty: You receive a 2-year warranty on your PI-Power Compact model. Please keep the original packaging and instruction manual for this purpose! If lost, the special packaging can be reordered for a fee.