PI-Power-Compact 300 Plus direct flow osmosis system max. 2.0 liters/minute
Wonderful, comforting, soft water - like from a cool, pure spring.
PI®-Power-Compact 300 Plus direct flow osmosis system max. 1.8 liters/minute
Our prices are the cheapest; if you see a cheaper price elsewhere, we will beat it by 10 EUR.
Unique direct-flow reverse osmosis system without a storage tank. For fast and convenient filtration of drinking water. Includes a PI® Cell Vitalizer for mineralizing and energizing the filtered water. Made in the European Union.
- Living water of the quality of the best spring waters
- Highest rejection rates of ingredients (97.5% - 99%)
- Very fast filtration of water directly from the cold water supply.
- Low wastewater rate of 0.45 liters of wastewater per liter of tap water
- Prevention of bacterial growth by eliminating the need for a water tank (standing water)
- Continuous membrane flushing and water-cooled pump (no thermal problems)
- Space-saving and compact design with control indicators for safe operation
- Low maintenance and follow-up costs thanks to a durable membrane.
- Free 3-liter sample of PI® water available to order from us
The PI®-POWER Compact SPECIAL version is particularly well suited for the following applications:
- Large households
- Restaurants
- Large medical practices and small clinics
Follow-up costs (as of 2020):
- Pre-filter set: Replace every 6 months (€29.99)
- Membrane set: Replace every 2 years (179.00 euros)
- PI®-Cell Vitalizer: Replace every 6-10 years (799.00 Euro)
Scope of delivery: The reverse osmosis system is delivered fully assembled and ready for connection. It consists of the under-sink unit, which filters the water, and the PI® Cell Vitalizer, which mineralizes and energizes the filtered water. The following components are included in the scope of delivery:
- PI®-Power-Compact Plus 300
- PI®-Cell-Vitalizer SPECIAL
- Faucet (3-way faucet available on request for an additional charge)
- T-piece with manometer and pressure reducer (for connection to the angle valve)
- Water stop for leakage monitoring
- Connection kit with small parts
Free drinking sample: A free drinking sample of the water can be ordered from us.
Materials used: All materials used are high-quality and free of harmful substances. The housing of the unit and the vitalizer is made of stainless steel. All plastic parts used are guaranteed free of phthalates (plasticizers), bisphenol A (hormones), acetaldehyde, and antimony.
Conditions for the incoming water (before reverse osmosis)
1. The incoming water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be above 1.7 bar.
4. The raw water TDS content (total dissolved solids) must be below 600 ppm (1200 µS) (if values are above this, please send a water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values above 25° dH, please send a water analysis and request special information on pre-softening).
Technical data:
Housing: Stainless steel
Base unit: Duracon
Cartridge housing: Polypropylene
Materials in the PI-cell vitalizer cartridge:
BCS PI Ceramics Type SS-16 Coral Sand
IMS-PI ceramics made from organic calcium
YMS-PI ceramics (Yamato Mineral Stone)
BCS PI ceramics type SS-6
BCS PI -Zeolites
Mass:
Installation standing:
| Height: | 43 cm |
| Width: | 11 cm |
| Depth: | 41 cm |
Installation lying down:
| Height: | 11 cm |
| Width: | 42 cm |
| Depth: | 41 cm |
Processing technology:
| Pre-filtration: | 2 pre-filters (sediment + carbon) |
| Fine filtration: | 2/150 gpd |
| Membrane production output: | 3.3 – 3.6 l/min |
| Yield*: | 55% pure water (1.5 – 1.8 L/min) |
| 45% wastewater (1.25 – 1.45 L/min) |
*The stated yield is only achievable under optimal conditions at a water temperature of approximately 25°C. Under unfavorable conditions (lower water temperature, high calcium content, etc.), the yield can be as low as approximately 1:2. This is calculated as 1 liter of permeate (pure water) to 2 liters of concentrate (wastewater). The amount of wastewater generated during membrane rinsing is not included in the yield figures.
-
Conditions for the incoming water (before reverse osmosis)
1. The incoming water must comply with the Drinking Water Ordinance!
2. The raw water temperature should be between 4 and 40°C.
3. The raw water pressure must be above 1.7 bar.
4. The raw water TDS content (total dissolved solids) must be below 600 ppm (1200 µS) (if values are above this, please send a water analysis and request special information).
5. The raw water hardness should be below 25° dH (for values above 25° dH, please send a water analysis and request special information on pre-softening).
Specifications
Our tap water today is far from its natural state. Essential metabolic processes are not optimally supported. Living cells in all organisms simply need "good" water.
- It can detoxify and cleanse
- can regenerate
- can strengthen the immune system
- can promote healthy growth
- can increase vitality
| PI®-POWER-COMPACT |
| "The cell is immortal. Only the fluid in which the cell floats is subject to degenerative processes." Dr. A. Carrel, Nobel Prize in Medicine |
European Patent: 0 541 796 B1
International patent: PCT / JP 90 / 00651
International approval:
WO 91 / 17957 28.11.91 G.91 / 27
Index C15: C 01 G 49 / 00
Trademark: No. 39906218.1 Designation: PI, ∏ protected by trademark law:
399 06 220.3, 399 06 217.3
End of manufacturer's statement
For legal reasons, we will not make any statements here regarding water revitalization or water enhancement. Interested customers should form their own opinion on this scientifically controversial topic before purchasing.
Book recommendations
Eckhard Weber, Vitalizing Water: Activating, Energizing, and Revitalizing Drinking Water (ISBN-10: 3778791680) or Ulrich Holst, The Secrets of Water Revitalization (ISBN-10: 3928554522)
WEEE Reg. No. DE 59051762
Manufacturer and EU representative
PI®‑Technology Europe, KNOVO Handels‑ und Beteiligungs GmbH
Fritschgasse 1, A-5020 Salzburg, Austria
+43 (0)662 870 180-12
pi-technology.europe@lvl.at
