800 GPD JG Direct Flow System, 5-stage.

Special price from May 5 - May 10, while supplies last.

The new class, with a brushless pump and innovative pre-filter housings that combine quick-change and classic housing designs.

What distinguishes this system from other 800 GPD reverse osmosis systems?

• Use of standard filters. (You can get these anywhere; with systems featuring special connectors, you are forced to buy proprietary replacements, which are significantly more expensive due to a lack of competition, and if the company goes insolvent, you can no longer use the system because no filters are available.)
• Brushless pump (continuous operation possible for up to 12 hours)
• Automatic membrane flushing (extends membrane lifespan by up to 50%)
• Lower power consumption than comparable systems
• All built-in components are of high quality, ensuring a long service life for the system. (with cheap components, failure shortly after the warranty is possible)

You cannot go wrong with this system!

The 800 GPD reverse osmosis system (up to 3,020 liters per day) with a brushless booster pump was designed specifically for users with maximum requirements. It is ideal for private use, offices, the ambitious aquarist (saltwater and freshwater), as well as professional commercial use in small cafes or restaurants.

A capacity of up to 3,020 liters of purified water daily enables high-performance water treatment previously known only from expensive professional systems.

An integrated pressure gauge precisely displays the current system pressure. Thanks to its space-saving design, the system can be installed even in tight spaces.

---

Simple filter changes via the new combination system.

Equipped with three modern combination housings for the pre-filters, the 6-month filter change is now even easier. Why? The system combines the advantages of classic 10" filters with a practical, novel quick-change system.
The filter media can be individually configured and replaced in just a few simple steps, for more flexibility and even easier maintenance.

---

Endurance and performance - The new extra-quiet brushless pump

The durable brushless booster pump ZS-DRO-B800G guarantees near-silent operation and stands out due to its low-wear operation.

Up to 12 hours of run time at a stretch are possible – with a subsequent cooling-down period of 30 minutes. The energy-efficient 24V power supply (ErP Step 2) requires only 0.5 watts in standby mode, which leads to significant energy savings.

---

Automatic membrane flushing – for a longer membrane lifespan

The intelligent membrane flushing automatically rinses the membrane for about 18 seconds before each water withdrawal. This protects the membrane and extends its lifespan, completely automatically.

---

Can be equipped with additional post-filters (e.g., mineralization)

Naturally, the system can be expanded with a mineral or vitality filter for additional water refinement.

---

Technical Data

• Membrane: HN-JCM® (Black) 800 GPD approx. 3,020 L/day (at 20°C water temperature)

• Pure water output: approx. 2.8–3.1 l/min

• Wastewater ratio: approx. 1:1.5

• Pump: Brushless 24V/DC, ZS-DRO-B800G brushless

• Run time: max. 12 h, then 30 min break

• Pump lifespan: up to 2,000 operating hours

• Flushing: Automatic, approx. 18s before withdrawal

• Valves: 2 solenoid valves + check valve

• Power supply: 200–240 V / 24 V, 10A, ErP-compliant (only 0.5 W standby)

• Pressure range: 1–4 bar input pressure

• Temperature range: 5–35 °C

• Housing: three white combination pre-filter housings

• Dimensions: 36 × 27 × 50 cm (L × W × H)

• Extras: 360° connections, automatic shut-off in case of pressure deviation

• Maintenance: Recommendation: Filter change every 6 months, membrane change every 2–3 years
  (Depending on water quality and usage behavior)

---

Included in delivery (You need nothing extra)

• 800 GPD Brushless reverse osmosis system (2025 model)

• all filter cartridges

• TFC membrane 800 GPD, model 3013-800

• Stainless steel faucet

• Power supply

• Filter wrench & membrane wrench

• Hose lines 3/8" & 1/4"

• Connection & installation kit incl. sealing tape

• Water connection adapter 3/8" with shut-off valve

• Installation manual

5-stage system:

1. Stage 5µ sediment
2. Stage CTO activated carbon
3. Stage 1µ sediment
4. Stage HNS-JCM® (Black) 800GPD membrane
5. Stage T33 GAC coconut shell filter

Link to replacement filter set

 

Manufacturer and EU responsible person

JG Filter
Am Erdbeerbrink 7
31718 Pollhagen
Phone: + 49 (0)5721 / 996245
Fax: +49 (0)5721 / 996244
E-Mail: info[at]der-wasseraufbereiter[dot]de