Limescale protection cartridge against limescale in water 10"x2.5"

Water filter cartridge to soften your tap water

These water softening cartridges for kitchen use contain a special ion-exchange granulate with a high capacity to remove calcium and magnesium, which cause hardness, from the water. This softens the water. Limescale and magnesium ions are exchanged for harmless soda ions (sodium carbonate). Hard water causes limescale deposits in water supply pipes, heating systems, washing machines, and many household appliances. The limescale, iron, and magnesium particles dissolved in the water ruin clothing, dry out the skin, and spoil the taste of food and drinks. The filter cartridges are specially designed so that the water flows through the entire ion-exchange granulate, ensuring maximum filtration efficiency.

5" inch cartridge:

- high ion exchange capacity (2 mval/l)
- different cartridge sizes.
- 10 µm polypropylene - filter insert
- NSF, FDA approval
- Operating temperature 2-52 C
- Capacity approx. 1000 liters or 6 months (whichever comes first)*
- Pressure drop: 0.2-0.4 bar
- Flow rate: approx. 3 liters per minute (depending on line pressure)

10 inch cartridge:

- high ion exchange capacity (2 mval/l)
- different cartridge sizes.
- 10 µm polypropylene - filter insert
- NSF, FDA approval
- Operating temperature 2-52 C
- Capacity approx. 2000 liters or 6 months (whichever comes first)*
- Pressure drop: 0.2-0.4 bar
- Flow rate: approx. 3 liters per minute (depending on line pressure)
- Height: 25 cm; Diameter: 7.3 cm
- suitable for all 10" filter housings

20"x2.5" cartridge

- high ion exchange capacity (2 mval/l)
- different cartridge sizes.
- 10 µm polypropylene - filter insert
- NSF, FDA approval
- Operating temperature 2-52 C
- Capacity approx. 3000 liters or 6 months (whichever comes first)*
- Pressure drop: 0.2-0.4 bar
- Flow rate: approx. 5 liters per minute (depending on line pressure)

20"x4.5" cartridge

- high ion exchange capacity (2 mval/l)
- different cartridge sizes.
- 10 µm polypropylene - filter insert
- NSF, FDA approval
- Operating temperature 2-52 C
- Capacity approx. 8000 liters or 6 months (whichever comes first)*
- Pressure drop: 0.3-0.5 bar
- Flow rate: approx. 18 liters per minute (depending on line pressure)

*Values refer to 8°dH. At higher degrees of hardness, the performance is reduced accordingly.