2x IFP Puro, Carbonit monoblock
2x IFP Puro, Carbonit monoblock
Quantity discounts possible!!!
The IFP Puro combines the unique properties of a sintered Carbonit® monoblock with 0.15 µm microfiltration through the internal Ster-O-Tap® capillary membrane. Even high levels of pollutants that could accumulate in the body are reliably filtered out. The IFP Puro filter cartridge has a high flow rate of 6-8 liters per minute. This makes it suitable for use with water turbulencers. It is ideal for low line pressures. The Ster-O-Tap® capillary membrane is tested according to ANSI/NSF Standard 42 (Particulate Reduction Class 1) and ANSI/NSF Standard 53 (Cyst and Turbidity Reduction). The dimensions and seals of the IFP Puro comply with standard market standards. For the filtration of bacteria and organic substances.
Service life:
The filter cartridge must be replaced after 6 months. Generally, approximately 5,000 liters of water can be filtered within 6 months. However, an earlier replacement may be necessary if the water flow is noticeably reduced. A premature replacement is not a defect in the filter cartridge but rather an indication of an increased presence of fine particles in the unfiltered water.
Filter fineness:
approx. 0.15 µm
Flow:
approx. 6-8 liters per minute (depending on the filter housing used and the line pressure)
Temperature:
For technical reasons, use only with cold water up to max. 26°C, protect from frost.
Scope of delivery:
2x IFP Puro
CARBONIT® monoblock filter cartridge IFP Puro
suitable for the devices SANUNO - VARIO - DUO.
Use in many commercially available standard housings is possible due to the standardized dimensions of the filter cartridge.
CARBONIT® Monoblock – baked block filter manufactured in
Sintering process, internationally patented, multiple awards and
scientifically recognized. (Not to be confused with loose fills
from granulated coal or extruded blocks).
Sterile (bacteria-free) water through Carbonit Monoblock IFP Puro
(Dual Stage Pro) with microfiltration membrane of 0.15 µm absolute
(STER-O-TAP with log 8 reduction). Standardized 9 3/4" element with
Flat seals and integrated O-ring (SOE). Particularly suitable for
Low water pressure. Filtration capacity of approximately 5,000 liters. Internationally patented filter composition. Meets ANSI/NSF Standard 53 (cyst & turbidity reduction) and EPA standards. The EPDWA guidelines for a filter fineness of at least 1 micron (1 µm) nominal and a recommended filter change every 6 months are also met. All for your safety!
The replacement cartridge is packaged in a handy individual box.
For technical reasons, use is only permitted with cold water up to a maximum of 28 degrees Celsius. Protect from frost. Filter replacement is recommended every 6 months.
Only original CARBONIT replacement cartridges offer a functional guarantee and the reassurance of using high-quality and monitored products.
