New: 800 GPD Direct Flow Reverse Osmosis System Water Point (3213-800)

800 GPD Direct Flow Reverse Osmosis System (brushless pump)

Simply an awesome system!

Clear, pure water right in your kitchen.

What are the biggest advantages of this system? Here they are:

5-stage reverse osmosis system with pressure booster pump and power supply suitable for continuous operation up to 6 hours at a time.

The 800 GPD system produces up to 2300 liters of pure water per day with a pure water /
Wastewater ratio of up to 1:1.5 to 1-2 at approximately 20°C. This corresponds to approximately 2-2.3 liters/minute.

This innovative system does not require a tank. The water is purified in four stages at the moment of extraction.
The risk of bacterial contamination in the tank is therefore eliminated.

This new system uses only high-quality quick fittings (no Jaco fittings), as well as special pre-filter housings with a double sealing ring that are easy to close manually.
The system can optionally be equipped with a safe tap with a ceramic valve.

Five filter stages for clean, pure water

Stage 1: Coarse filter/sediment filter,
Filter fineness 5 microns (For removing coarse particles such as sand, rust, chlorine and lime particles)
Stage 2: Activated carbon granules: removes chlorine and organic impurities
Stage 3: Fine filter/sediment filter 1 micron: removes particularly fine particles
Stage 4: Membrane 800GPD, 0.0001µm: removes all pollutants and flavors
Stage 5: Activated charcoal coconut

Please note that vibrations during transport may loosen screw connections and cause leaks. In this case, tighten the connections until the leak is resolved.

Scope of delivery:

• Reverse osmosis system 800 GPD
• 3 pre-filters
• 1 high-quality 800GPD membrane
• Activated carbon filter
• Integrated pressure booster pump (brushless) for optimal performance
• 1 transformer Erp 2 max. 0.5 watts
• Filter wrench and membrane wrench
• Hose assemblies in 3/8" and 1/4" sizes
• Complete connection and mounting kit for 3/8 inch angle valve
• Detailed installation instructions in German

*The performance and quality of the purified water from the 800 GPD depends on the water quality of the tap water.
Factors such as temperature, conductivity, hardness, and pH value are affected. With average tap water of approximately 250 ppm, purified water with a conductivity of approximately 5–25 ppm is possible. Maximum continuous runtime is 6 hours.

Link to replacement filter set

Link to the membrane